Items | Specifications | |
Downlink | Uplink | |
Frequency Range | 2110MHz~2170MHz | 1920MHz~1980MHz |
Output Power | 43±1dBm | -5±1dBm |
Max Gain | 50±1dB | 25±1dB |
Gain Adjustment Range | ≥20dB@1dB Step | ≥20dB@1dB Step |
Gain Adjustment Error | ≤±1.5dB | ≤±1.5dB |
ALC | ≥10dB | -- |
In-Band Ripple | ≤2.0dB | ≤2.0dB |
ACPR | ≤-45dBc | -- |
EVM | ≤3% | -- |
Spurious Emission | ≤-36dBm/9KHz-1GHz | |
≤-30dBm/1GHz-12.75GHz | ||
Noise Figure | -- | ≤1.8dB |
Maximum Input Power | 0dBm | -10dBm |
VSWR | ≤1.5 | |
Working Voltage | DC+28V | |
Working Current | ≤3.5A | |
RF Connector | 1XSMA Female for PA OUT 4XMCX Female for PA IN & LNA IN & LNA OUT, | |
Power Supply and Monitoring Interface | POWER-6 Pin 1 Corresponds to RS485 Serial Port A; Pin 2 Corresponds to RS485 Serial Port B; Pin 3&4 Correspond to GND; Pin 5 Corresponds to the PA Enable/Disable Switch, High Level (+3.3V) Means the Power Amplifier is OFF, Low Level (0V) Means the Power Amplifier is ON, the Factory Default Low Level (0V); Pin 6 Corresponds to DC+28V; | |
Impedance | 50Ω | |
Working Temperature | -40℃~+65℃ | |
Dimension | 130*110*21mm |